Thermal Washer Disinfector
Thermal Washer Disinfectors enable you to achieve safe, visible cleaning and disinfection results for dental instruments. They are particularly gentle on the instrument material and are recommended by reputable manufacturers for preparing transmission instruments.
Compliant at the highest level: AS4187
*Miele Thermal Washer Disinfector exclusively available in Australia through W&H.
PG 8591/PG 8581 offers:
- Safe and visible cleaning and disinfection results for dental instruments
- Gentle preparation of transmission instruments
- High cleaning performance
- Outstanding cleaning performance for large batch throughputs
Patented circulation pump
Outstanding cleaning performance owing to the
patented circulation pump.
Cleaning and disinfection
Safe and visible cleaning and disinfection results for dental instruments.
Preparation of instruments
Gentle preparation of instruments
Outstanding cleaning performance
for large batch throughputs.
Hygiene and safety
Gap-free rinsing space
The gap-free rinsing space prevents organic deposits. The highest hygiene and safety standards for your patients and practice employees.
37 minute cycles
No need to scrub your Instruments prior to loading. Capacity for for up to 22 clinical and surgical handpieces in one load. 37 minute cycles without drying, only an extra 7 minutes for a full drying cycle.
Create a more efficient use of time in your practice.
Miele Vario TD Cycle
In the Vario TD Dental programme, pre-cleaning commences at low temperatures to prevent the denaturation of blood residues. After an intensive main wash phase, thermal disinfection then takes place at temperatures in excess of 90°C which are maintained for 5 minutes. In order to protect surgical instruments, the final rinse is ideally performed with demineralised water without any surfactant added.
This approach is particularly gentle on materials and is particularly recommended for the reprocessing of transmission instruments.
Starter Package Offer
Starter Package Offer
Thermal Washer Disinfectors
Standard Upper and Lower Basket
E379: Open Half Mesh Instrument Tray x 2
E523: Cassette and Tray Holder
The Miele Thermal Washer Disinfector enables the safe and reproducible cleaning & disinfection of instruments in accordance with AS4187. This approach is particularly gentle on materials and is also recommended for the reprocessing of handpieces and hollow tips. In the Vario TD Dental program pre cleaning commences at low temperatures to prevent the denature of blood residues.
After an intensive main wash phase, thermal disinfection takes place at temperatures in excess of 90 degrees Celsius followed by the new Eco dry phase to complete the process.
Miele PG8581 PD W TWD
Miele PG8581 AD SS TWD
Miele PG8591 AD SS TWD
Miele Accessories Package
MIELE PG8581 AD SS TWD
A102 Upper Basket
A151 Lower Basket
E379 Insert 1/2 Mesh Tray
E337/1 Insert 2/5
E523 Insert 1/5
Dual Check Valve
Testimonials Miele TWD
Miele TWD Convenience
Miele TWD Safety
Miele TWD Performance
Instructions for use
Find all languages of the Update Hygiene and Maintenance (EN ISO 17664:2017) in the Download Centre.
Videos & Tutorials
Type: Thermal disinfector PG 8581 SS Undercounter/freestanding unit with lid •
Circulation pump [Qmax. l/min.] 500 Controls/Programmes TouchControl/7 programmes • AutoClose - Automatic door lock • Buzzer, acoustic signal at end of programme • Ethernet module/RS 232 module for process documentation Optional Water connections 1 cold water, 2.0–10 bar flow pressure (200–1000 kPa) (protection against backsiphoning according to EN 1717) • 1 cold water for steam condenser, 2.0–10 bar flow pressure (200–1000 kPa) (protection against backsiphoning according to EN 1717) • 1 demineralised water, 2.0–10 bar flow pressure (200–1000 kPa) (protection against backsiphoning according to EN 1717) • 1 hot water, 2.0–10 bar flow pressure (200–1000 kPa) (protection against backsiphoning according to EN 1717) • No. of inlet hoses, ½" with ¾" threaded union, l = approx. 2.0 m 4 Drain pump Ø 22,. Max. head height: 100 cm • WaterProof System (WPS) • Electrical connection 3N AC 400 V 50 Hz convertible to AC 230 V 50 Hz, Supply lead, approx. 1.5 m, 5 x 2.5 mm² incl. plug • Heating [kW] 8.5 Circulation pump [kW] 0.8 Total rated load [kW] 9.3 Fuse rating [A] 3 x 16 Dispenser systems 1 door dispenser for surfactant • 1 dispenser pump for liquid detergent • 1 dispenser pump for neutralising agent – Connection options DOS K 85 and DOS K 85/1 liquid dispenser 1 Water softeners For hot and cold water, max 65°C • Steam condenser Aerosol • Drying unit/Radial fan Eco Drying [kW] 0.3 Heater bank [kW] 2.2 Total rated load [kW] 2.5 Air throughput [m³/h] 47 Temperature selection in 1° increments [°C] 50 – 115 Time selection in 1-minute increments [min] 0 – 120 Particulate filter/HEPA filter/filter rating (DIN EN 1822)/filter life H 13/>99.95%/200 h Dimensions/Weight External dimensions H/W/D (without lid H 820 mm) [mm] 835/600/600 Cabinet dimensions H/W/D [mm]: 522/536/top=518, 522/536/top=518,
Weight [kg] 78 Casing options White casing, Metal (AW) Stainless steel (AE) • Compliance with standards DIN EN ISO 15883-1/2/6, EN 61010-2-40, EN 61326 -1 • Test certificates VDE, VDE-EMC, IP 21 • MDD CE 0297 •