News

Dental instruments - more than just a tool

Synea - dental handpieces
Instruments coated with silicon oxide (on the right) exhibit no signs of use at all.

Silicon oxide – the secret behind surface sealing

The comparison clearly shows that while instruments with a conventional coating are already displaying significant signs of wear after two years of practice use, instruments coated with silicon oxide show no signs of use at all.

Thanks to the unique combination of high-grade base stainless steel and an ultra-thin sealing layer, the W&H instruments are characterized by maximum robustness and value retention. However, not only is the lifetime significantly increased: the aesthetic appearance of the instruments is also maintained for several years - clearly an asset for any modern dental practice.

High-quality, well-serviced handpieces are the calling card of a well-managed dental practice. Their outer appearance, however, quickly loses its shine due to the handling during treatment and the re-processing and maintenance process. W&H can provide perfect surface protection with the help of the latest coating technology. Signs of wear and tear are now a thing of the past. The high-quality instruments fully meet the aesthetic requirements of both patient and dentist.

Nowadays, a well maintained exterior appearance matters of course in many areas of life. Our first impression of people is heavily influenced by their outer appearance. We judge them completely subconsciously within a matter of seconds. This first impression is also a key factor in the dental clinic: the patient draws a conclusions about the quality of the treatment from his fist look at the dental instruments as soon as he takes a seat in the dental chair. Much to the dislike of dentists, many instruments tend to look worn and dull after only a short time due to the high demands placed on them during sterilization and reconditioning. The instruments give an outdated impression despite the fact that they function perfectly.


Innovative surface ensures perfect appearance

The new scratch-resistant coating
The new scratch-resistant coating ensures not only easy cleaning but also extensive protection and high value retention.

Following the market’s requirement for durable products, W&H developed a unique scratch-resistant surface. The aim of this additional coating is to increase the durability and longevity of the dental handpieces and also to convey a high-end impression. The Synea Vision range, along with the Surgical Straight- & Contra Angle Handpieces , are provided with this innovative coating. As a result, W&H products offer maximum robustness even under extreme loads.

W&H develops its products exclusively in close collaboration with the user. Information regarding the essential needs of patient and dentist was collected in many discussions with dentists all over the world. Michael Pointner, Strategic Product Manager, says, “We were particularly surprised by the enormous influence that a dental practice’s surroundings have on the patient’s mood. We defined our product requirements based on this knowledge. Our primary aim is to meet the high demand for quality expressed by the dental practices.”

Tested by users

A number of different coatings were investigated for their usability in the W&H research and development department; they were tested in the laboratory and ultimately tested by dentists in daily clinical operation. Dipl.-Ing. Beate Wagner was in charge of that project. The materials scientist says that developing a coating that would satisfy the exacting requirements for instrument surfaces posed a particular challenge.

“During development, the aim was to find a coating that was characterized by excellent durability and high wear resistance. During their lifetime, instruments pass through a huge number of conditioning cycles. It is therefore important that the surface can withstand the extreme loads,” Wagner explains. “Other aspects are the instrument’s grip, the coating’s biological compatibility and the possibility of easy cleaning. We can meet all these criteria perfectly by applying an innovative inorganic coating. The coating is produced using a special process known as plasma-enhanced chemical vapour deposition and offers optimum all-round protection.”

Strategic Product Manager Ing. Michael Pointner and materials scientist Dipl.-Ing. Beate Wagner
Strategic Product Manager Ing. Michael Pointner and materials scientist Dipl.-Ing. Beate Wagner

The innovative surface coating is the result of intensive development work. Strategic Product Manager Ing. Michael Pointner and materials scientist Dipl.-Ing. Beate Wagner are convinced that this will address important market requirements.

Initial positive feedback from users confirms the high relevance of the new W&H scratch-resistant surface coating in daily clinical use. “Compared to our conventional coatings, which after some time shows signs of use on the instruments, the new process offers lifetime protection. Even after several years of daily use, there are no significant signs of surface damage on the surface of the instruments,” according to Michael Pointner.

The new surface coating was put to the test with the help of the dentists who took part in the trial project. The W&H instruments were tested for two years. “After the test phase was complete, the feedback for W&H was crystal clear: the majority of the test users were so enthusiastic about the innovative coating that they requested other instruments in comparable quality.”

comments